Waste Paper Balers are equipment specially used to process and compress large amounts of waste paper. The purpose is to reduce the volume of waste paper, facilitate storage and transportation, and improve recycling efficiency. This type of equipment is very common in offices, printing plants, packaging plants, recycling depots, etc.
Item | Name | parameter |
mainframe parameter |
Bale size | 1100mm(W)×1250mm(H)×~2200mm(L) |
Material type |
Scrap Kraft paper, Newspaper, Cardboard , Soft Film, Plastic, |
|
Material density | 600~700Kg/m3(Moistures 12-18%) | |
Feed opening size | 2400mm×1100mm | |
Main motor power | 45KW×2sets+15KW | |
Main cylinder | YG430/230-2900 | |
Main cylinder force | 250T | |
Max.system working force | 30.5MPa | |
Mainframe weight(T) | About 38 tons | |
Capacity | 32-35 ton per hour | |
Oil tank | 2m3 | |
Mainframe size | About 11.5×4.8×5.8M(L×W×H) | |
Tie wire line | 6 line φ3.0~φ3.5mm3 iron wire | |
Pressure time | ≤28S/ (go and back for empty load) | |
Chain conveyor technology | Model | NK-III |
Conveyor weight | About 11 tons | |
Conveyor size | 2000*16000MM | |
terra hole size | 7.303M(L)×3.3M(W)×1.2M(deep) | |
Conveyor motor | 11KW | |
Cool tower | Cooling system | Water cooling +fan Cooler |
The working principle is to use a motor to drive a hydraulic system or other mechanical pressure system to compress loose waste paper into blocks or regular rectangular parallelepiped shapes. During the operation, the waste paper is fed into the feed port of the baler, and then compressed under high pressure by a compression device, finally forming compact paper blocks, which can be sent to recycling stations for reuse.
The waste paper baler has the characteristics of simple operation, high efficiency, and low energy consumption. It can greatly reduce the volume of waste paper, save storage space, and contribute to environmental protection. In addition, by using a waste paper baler, the recycling value of waste paper can be increased and the recycling of resources can be promoted.