Phone Number : 86-2986031588
WhatsApp : +8615021631102
November 26, 2021
Any mechanical equipment must be operated in strict accordance with the operating rules when in use to avoid accidents due to improper operation, and the metal shearing machine is no exception.
Safety operating procedures for hydraulic metal shears:
1. The metal shearing machine should be operated by a person, and other people are not allowed to use it without training.
2. Before operation, check whether all parts are normal and whether the fasteners are firm.
3. During operation, the human body is not allowed to approach the transmission part and the knife edge of the equipment, and pay attention to the safety of the surrounding personnel to prevent the material from lifting up and hurting people. When cutting, the material should be cut as close as possible to the inside of the knife. When cutting shorter materials, do not use it. Hand-held workpieces should be fed with clamps.
4. When the metal shearing machine is running, the operator is not allowed to leave the post without authorization, and the power supply should be cut off in time when the work is completed or temporarily leaving the post.