|Place of Origin:||China|
|Minimum Order Quantity:||1set|
|Packaging Details:||wooden case|
|Delivery Time:||T/T40% advance payment,and 60% against approval test report before shipment.|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Supply Ability:||1000 set per year|
Baling Press Application For Lifting ChamberTextile Baler:
Second-hand clothes,towels,pillow,quilt,carpet, used shoes, used clothing rags,textile fiber yarns and other textile waste.
A ifting chamber baler machine is sometimes popular as used recycle used clothing, towels clothes baler clothing baler as well as textile balerIt specifically spinning yarn. suits to meet the baling demands of the textile waste recycling industry. It is an ideal baling press choice for almost any textile manufacturer used clothes recycling center second-hand clothing.
Operation steps of the garment Baler machine
Garment Baler machine
Clothing baler, quilt baler, shoe baler
1. The pressure of this machine has been fully debugged before leaving the factory, as long as the power cord is connected, hydraulic oil is injected, and the following steps are followed, it can be used normally;
2. The machine must be steadily placed on the concrete without swinging. The foundation depends on the local conditions;
3. Check whether the oil discharge port at the bottom of the fuel tank is closed, make sure to close the top of the fuel tank, and then open the sealing cap of the fuel tank top, inject the corresponding hydraulic oil according to the pressure tonnage of the machine. good;
4. If the power cord is connected properly, the motor will rotate during the test. If the pressure plate will not be pressed down, remember to turn off the switch in the electric box first, change the position of the power cord, and try the machine again;
5. If the machine is tested well, exhaust the air in the fuel tank and tubing, and then put the items into the tank for compression and packaging;
6. When the machine is not used for a long time, raise the pressure plate to the top, turn off the switch in the electric box, and then turn off the main power supply.
Nick Mechinery Garment Baler Machine is widely used in old clothes recycling factories. It has fast Baler speed and low labor cost. It is an indispensable tool in old clothes recycling factories. www.nkbaler.net