RDF waste paper baler waste paper Press Packaging with competitive price and good quality

Various precautions for using semi-automatic hydraulic waste paper baler
1. Before using the hydraulic waste paper baler, the hydraulic oil must be kept clean. Before use, the hydraulic oil may be contaminated by the outside during the storage process, or there may be errors, so pay attention to the state of the oil before filling the oil, if any problems are found, they should be dealt with in time.
2. Keep the system clean before installing the waste paper baler. The system should be cleaned before installing the waste paper baler. When cleaning, it is best to use the working oil or test oil required by the hydraulic device. Do not use kerosene, gasoline, alcohol, etc. Do not use cotton yarn or cotton cloth to clean the fuel tank. When cleaning, the pump of the waste paper baler should be operated in a gap.
3. Keep the waste paper baler clean before changing the oil. According to the requirements of use, the hydraulic oil of the waste paper baler should be replaced regularly. Before changing to new oil, the entire system must be cleaned. After the cleaned oil is poured out, it is replaced with new oil, and then it works after a test run.
In addition, in the process of using the waste paper hydraulic baler, the hydraulic oil must be kept clean. The more severe the wear of the components, the greater the failure may be. In the use of hydraulic oil, finding ways to keep the oil clean is a measure to increase the life of the components.
Nick Machinery's automatic horizontal waste paper baler equipment has high technical content, stable equipment performance and guaranteed quality.

Usage

Specialized in recycling and compressing the loose materials like plastic film, PET bottles, plastic pallets waste paper, cartons, cardboards trims/scraps, etc.

Machine Features

●　 Heavy duty close-gate design for more tighter bales
●　 Hydraulic locked gate ensures more convenient operation

●　 It can feed material by conveyor or air-blower or manual.

●　 PLC.controlsystem, It Can automatically inspection feed,it can press to front end each time and available for manual bunch one-time automatic push bale out and so on process.