|PLC System:||LG/ Mitsubishi||Bear:||NSK|
|Steel:||Bao Steel||Hydraulic Part:||Japan Brand In China|
|Electrical Components:||Schneider||Tubing /pipe:||China|
What should be paid attention to when adjusting the speed of waste paper baler
Speed ??regulation of waste paper baler
Waste paper baler, horizontal baler, hydraulic baler
In the process of a working cycle, the empty stroke speed of the waste paper baler is generally high, and it has different movements and bears different loads in different working stages. Therefore, in the hydraulic system, the flow rate and pressure of the hydraulic pump are often determined according to the required movement speed and the load to be received during the working phase.
Then, without increasing power consumption, a fast loop is used to increase the idle stroke speed of the working mechanism. The characteristic of the fast circuit is that the load is small (the pressure is small) and the flow is large.
Double hydraulic pumps are now used for oil supply. The low-pressure human flow pump and the high-pressure small flow pump are connected in parallel. When they supply oil to the system at the same time, they can realize the rapid movement of the hydraulic cylinder. When entering the work advance stage, the system pressure rises and the solenoid valve opens to unload the human flow pump. The small flow pump supplies oil to the system, and the movement of the oil cylinder becomes a slow-moving work stroke.
NKBALER is a manufacturer specializing in the production of waste paper balers, providing more than 140 kinds of hydraulic balers. For more information, please consult us: www.nkbaler.com
Specialized in recycling and compressing the loose materials like plastic film, PET bottles, plastic pallets waste paper, cartons, cardboards trims/scraps, etc.
● Heavy duty close-gate design for more tighter bales
● Hydraulic locked gate ensures more convenient operation
● It can feed material by conveyor or air-blower or manual.● PLC control system, It Can automatically inspection feed, it can press to front end each time and available for manual bunch one-time automatic push bale out and so on process.
● Unique double-cutting design of cutters improves the cutting efficiency and lengthens the lifespan of the cutters
● Particular anti-slide design of the machine makes nicer bales
● Unique trunnion-mounted frame and ball-end joint design for the main cylinder avoid the torque on the rod, which lengthens the lifespan of the seals
|Feed opening size(L*W)||1350*1100mm||1500*1100mm|
|Bale line||3 Line /Manual strapping||5 Line /Manual strapping|
|Out-bale way||Push bag||Push bag|
|Bale Density (OCC)||500-600kgs/m3||400-500kgs/m3|
|Voltage(can be customized)||380V/50Hz||380V/50Hz|
|Feeding Device||cyclone / conveyor||cyclone / conveyor|