waste paper baling machine cardboard paper box recycling baler machine with wholesale price and prompt delivery

How to maintenance the hydraulic baler
Good equipment is maintained, and bad equipment is caused by your carelessness. The machines in the market are really dazzling. It is impossible to distinguish between the good and the bad. It can only be done in a test machine. see,
But the new machine is generally invisible. When you buy the waste paper box baler, after a long time of use and washing, you can discover the mystery. Good equipment is presented to everyone by maintenance. The bad machine is the problem caused by you not taking care of it properly.
Before opening the waste paper box baler, check the machine bearings, hydraulic cylinders, fuel tanks, and conveyor belts for any garbage left over from yesterday's work, and then check if there is any open space around, so that you will not be rushed during the Baler. To vacate the ground to find a place for the compressed material block, let's see if there are any matters needing attention before starting the machine, check whether the parts of the strapping machine are in good condition, and look at the screws and nuts of each part If there are signs of loosening, and then there is such a situation, please ask the master to fasten it quickly. If there is a shortage of nails and caps, they can be filled in time. This equipment will not only make your profits return, but also will make your factory more profitable.
NKBALER recommends that you do a good job of daily maintenance and maintenance of the hydraulic baler, which can effectively extend the service life of the hydraulic baler and create greater profits for you.

Usage

Specialized in recycling and compressing the loose materials like plastic film, PET bottles, plastic pallets waste paper, cartons, cardboards trims/scraps, etc.

Machine Features

●　 Heavy duty close-gate design for more tighter bales
●　 Hydraulic locked gate ensures more convenient operation

●　 It can feed material by conveyor or air-blower or manual.

●　PLC control system, It Can automatically inspection feed, it can press to front end each time and available for manual bunch one-time automatic push bale out and so on process.
●　 Unique double-cutting design of cutters improves the cutting efficiency and lengthens the lifespan of the cutters
●　 Particular anti-slide design of the machine makes nicer bales
●　 Unique trunnion-mounted frame and ball-end joint design for the main cylinder avoid the torque on the rod, which lengthens the lifespan of the seals