Hydraulic baler, horizontal baler
The hydraulic baler is a kind of baler equipment in the machinery industry. When checking the hydraulic baler equipment, first check whether its pressure gauge is abnormal or in normal working condition. The second most important thing is to enter the working state without proceeding. It is necessary to develop the prerequisite inspection and preparation work to avoid the impact on production!
Do we have a thorough and comprehensive understanding of hydraulic balers? This is also what everyone, especially the learners, care about. So next, in response to this problem, Nick Machinery will give a specific explanation of some content, which is not available before, so that everyone can further understand the product and be able to Get what you want from it and benefit yourself.
1. The indication of the pressure gauge in the hydraulic baler is normal, but the pressure is unstable. What is the reason?
Answer: The indication of the pressure gauge in the hydraulic baler is normal, but the pressure is unstable. First of all, you must determine whether the upper chamber pressure is normal or the system pressure is normal. In addition, its working mode is fixed range or fixed pressure. If it is a fixed-range work method, it will have an impact when the pressure is released, so its stretching is unstable. If it is a constant pressure, it is caused by air in the oil circuit or oil pump, or a problem with the oil suction pipe. At this time, check and solve it. In addition, it is also related to materials and molds.
2. What do the letters on the hydraulic baler model mean?
Answer: One type of hydraulic baler includes hydraulic pressure, series introduction, and machine tonnage. It should not be mistaken, otherwise problems will occur.
NKBALER is a manufacturer specializing in the production of hydraulic balers. We have a professional R&D team and after-sales team.
|NKY81-1600B Metal hydraulic baler major technique Number)|
|1||Main pressure cylinder||Type||Y81-160||Quantity||1|
|Intended push force||1600KN||return trip size||800|
|2||Side pressure cylinder||Type||Quantity||1|
|Intended push force||1320KN||return trip size||1250|
|Baler density||≥2000 kg/㎡|
|5||hydraulic system work force||26MPa|
|6||Pressure Indoor Size||1600*1000*700mm|
|7||Metal Mass Size||(300-500)*400*400mm|
|8||sigle to circulate time(not contain feeding time)||about 120 s|
|regulations turn speed||970rpm||Quantity||1|
|10||hydraulic pump||Type||63YCY14-1B||the maximum pressure||31.5MPa|
|Intended row capacity||63ml/m||Quantity||1|
|Door and edge of box have cut-kniives/|
|11||Machine Weight/||about 11.8 T|