Horizontal Hydraulic Waste Paper Baler is a baling device used for loose materials such as waste paper, waste plastics, and straw. It uses a hydraulic system to compress loose materials into denser blocks, significantly reducing volume and increasing density for easier transportation and storage. The following is a detailed introduction to the horizontal hydraulic baler:

I. Structural Features

Support Structure: Horizontal Hydraulic Waste Paper Baler typically includes a support frame with a base plate and front and rear side baffles. Jacks with piston rods connected to pusher plates are mounted on the support frame to push the material into the baling chamber.

Feeding and Discharging: The support frame has a feed inlet for feeding loose materials. The discharge outlet is located at the other end of the support frame; after the material is compressed into blocks, it can be removed through the discharge outlet.

Rope Threading Device: To facilitate the transportation and securing of the baled material, a horizontal hydraulic baler usually has a rope threading device. After the material is compressed, ropes are threaded through the rope groove to secure the blocks.

II. Working Principle

Starting the Equipment: First, start the Horizontal Hydraulic Waste Paper Baler to bring it into working condition. Material Feeding: Loose material is fed into the baling chamber through the feed inlet.

Material Compression: The hydraulic system is activated, causing the jacks to operate. The piston rod pushes the pusher plate to compress the material into blocks.

Material Removal: Once the material has been compressed into the desired block shape, the discharge port is opened to remove the blocks.

Material Fixing: If necessary, the blocks can be secured by threading ropes through the rope groove using the rope threading device.

III. Scope of Application: The Horizontal Hydraulic Waste Paper Baler is suitable for baling various loose materials, such as waste paper, waste plastics, and straw. Baling these materials significantly reduces their volume, facilitating transportation and storage.

IV. Precautions for Use:

Operational Safety: When operating the Horizontal Hydraulic Waste Paper Baler, strict adherence to safety operating procedures is essential to ensure personal and equipment safety.

Maintenance: Regular maintenance of the horizontal hydraulic baler is crucial, including cleaning the equipment and inspecting the hydraulic system, to ensure normal operation.

Troubleshooting: If any malfunction or abnormal condition is detected during use, immediately stop the machine for inspection and contact a professional repair technician.

Nick mechanical hydraulic baling machine is specially used in the recovery and packaging of loose materials such as waste paper, waste cardboard, carton factory, waste book, waste magazine, plastic film, straw and other loose materials.

https://www.nickbaler.com

Email:Sales@nkbaler.com

WhatsApp:+86 15021631102