Phone Number : 86-2986031588
WhatsApp : +8615021631102
July 19, 2021
The correct use, careful maintenance and careful maintenance of the waste paper baler can keep the equipment in good condition all the time, reduce the occurrence of failures, and extend the service life.
The following issues should be paid attention to when the hydraulic system of the waste paper baler is in operation:
1. The oil temperature should be controlled within the range of 35-55℃. In winter, when the temperature in the fuel tank does not reach 25℃, the sequential action of the actuators is not allowed. The heater should be turned on for heating, or the oil pump should be turned on to make the pump idling in summer. When the oil temperature is higher than 60°C, cooling measures should be taken, and the working conditions of the system should be paid close attention. If there is a problem, the pump should be stopped in time.
2. The operator of the waste paper baler must be familiar with the principle of the system, master the sequence of actions of the system and the adjustment methods of each component.
3. Before starting the waste paper baler equipment, check whether all the movement mechanisms and solenoid valves are in the original state, and check the oil tank level. If the amount of oil is insufficient, the hydraulic pump is not allowed to start.
4. For hydraulic equipment after 4h, before starting to work, the pump should be idling for 5-10min before it can work under pressure.
The manufacturer of NICKBALER Baler is mainly to provide convenient, fast and economical solutions for waste paper, plastic, straw, scrap metal and other waste recycling and processing enterprises. www.nickbaler.net