The hydraulic oil of the Cambodian shearing machine is heating up

The normal temperature of the hydraulic oil of the metal shearing machine should be controlled between 35～60℃. As summer comes, as the temperature gradually rises, the temperature of the hydraulic oil of the metal baler will also rise.
In addition to the influence of the surrounding environment, the temperature of the hydraulic oil has other reasons. When the temperature of the hydraulic oil of the metal baler is found to rise, the customer can start to find the reason from the following aspects:
1. Poor heat dissipation
Excessive accumulation of dirt on the surface of the radiator will result in poor heat dissipation and poor ventilation, resulting in excessive oil temperature; too low liquid level in the hydraulic oil tank will result in a lack of oil circulating in the system, which will also lead to excessive oil temperature in the system.
2. Incorrect selection of hydraulic oil trademark
Incorrect selection of the hydraulic oil brand, especially the oil viscosity target, will directly threaten the normal operation of the hydraulic system. Therefore, only a specific viscosity scale and a minimum viscosity change can be used.
When selecting hydraulic oil, you should also consider the detailed construction area and season. In winter, you should choose hydraulic oil with lower viscosity for winter construction. In summer, you should choose hydraulic oil with higher viscosity. For machines with clear oil specifications, it should be strict. Fill hydraulic oil as required.

NICKBALER shears are strictly controlled in accordance with the ISO9001 international quality management system operation mode, and the quality fully meets the requirements of economic industrial design. https://www.nickbaler.com