Phone Number : 86-2986031588
WhatsApp : +8615021631102
August 29, 2023
Regarding the waste paper baler, when the entire equipment is completed, it may be long-term use to replace the hydraulic oil. The hydraulic system needs to be cleaned once. So how to clean the waste paper baler pump correctly?
1. Waste paper baler to clean up the environmental site.
2. Use low-viscosity special cleaning oil, and heat the oil in the oil tank of the hydraulic baler when cleaning.
3. The waste paper baler initiates the hydraulic pump and makes it empty. During the cleaning process, you must tap the tube lightly so that you can get the effect of removing the attachments. Clean the oil filter for 20 minutes to check the contamination of the oil filter, and clean the filter, and then clean, repeat this many times until the filter Stop without many pollutants.
4. For the more messy hydraulic system, each area can be cleaned according to the work area. The hydraulic cylinder can also be connected to allow the hydraulic cylinder to reciprocate to clean the system.
5. After the waste paper baler is cleaned, the cleaning oil must be drained as much as possible, and the inside of the oil tank must be cleaned. Then remove the temporary cleaning circuit to restore the hydraulic baler system to normal operating conditions.
The appearance design of the NICKBALER hydraulic baler is practical and beautiful, and the key components are uniformly used domestic and foreign well-known products, which have the characteristics of fast speed and high precision. https://www.nickbaler.com