Small waste paper balers

Waste Paper Baling Press Machine
Waste Paper Baler, Waste Cardboard Baler, Waste Newspaper Baler
During the use of the equipment, it is inevitable that this or that small episode will occur. When the baler suddenly stops during operation, what should I do? Let me share with you today:
1. Check the operation of the pump. If the small waste paper baler is noisy, the needle pendulum is large, and the oil temperature is too high, the pump may be severely worn.
2. Understand the operating efficiency of the pump. Comparing the temperature of the pump casing and the oil tank, if the temperature difference between the two is higher than 5 °C, it can be considered that the efficiency of the pump is very low.
3. Check the oil leakage at the pump shaft and the connection, and pay special attention to leakage at high temperature and high pressure.
4. Observe the indicated value of the vacuum gauge installed at the suction pipe of the pump. During normal operation, the value should be below 127mmhg; otherwise, check the oil filter and working oil of the small waste paper baler.
NICKBALER reminds you that in the process of using the waste paper baler, you must strictly follow the product instructions and do not ignore some small details to ensure safe and effective production. If you have any other questions, you can go to the NICKBALER website to learn https://www.nickbaler.net