Phone Number : 86-2986031588
WhatsApp : +8615021631102
July 27, 2021
The hydraulic oil tank on the plastic bottle Baler, in order to make it work better and run longer, the design is also painstaking, in order to better prevent the pollution of the internal oil, we have more rationalized its design, comprehensive Note the following points.
1. The distance between the oil suction pipe and the oil return pipe on the hydraulic cylinder should be as far as possible. The oil suction and oil return can be separated by a partition plate to ensure the cleanliness of the oil in the oil tank.
2. A filter device should be installed at the entrance of the oil suction pipe. The filter can better avoid air bubbles when the hydraulic pump of the waste paper baler sucks in air or returns oil.
3. Set a cover plate on the fuel tank of the plastic bottle Baling Press machine, and add a sealing ring at each nozzle to ensure its tightness.
4. The bottom of the fuel tank should be kept at least 150mm from the ground. This is to better dissipate heat and facilitate the maintenance of the machine.
NICKBALER plastic bottle Baling Press machine is easy to operate, precise control, fast feeding speed, high production capacity, simple and convenient operation. www.nickbaler.com
