Phone Number : 86-2986031588
WhatsApp : +8615021631102
September 1, 2023
The hydraulic system of the waste paper baler is a necessary hydraulic component, so what are the precautions for installing and storing the hydraulic valve system of the waste paper baler?
1. Before installing the hydraulic valve of the waste paper baler to the hydraulic system of the waste paper baler, you should check the order model and refer to the model description.
2. When installing the hydraulic valve, make sure that the hydraulic valve and its surroundings are clean. The fuel tank must be sealed to prevent external contamination. Before installation, the pipeline and fuel tank must be free of dirt, rust, sand, debris, etc.
3. It is not allowed to use sealing materials such as hemp rope, putty or sealing tape.
4. The waste paper baler manufacturer recommends to use the fuel filter and air filter with the same precision as the hydraulic system filter.
5. When installing the hydraulic valve, make sure that the mounting surface and the bottom plate are free of moisture and oil.
6. The hydraulic valve must be stored in a dry, dust-free, corrosive and steam place. When the storage period exceeds 6 months, inject anti-rust oil into the valve and then seal it.
NICKBALER produced waste paper baler, vertical waste paper baler, hydraulic waste paper baler, horizontal waste paper baler, automatic waste paper baler, good quality and low price, our company has a professional after-sales service team, free of charge Guide the installation and commissioning of equipment. www.nkbaler.net