The operation process of the vertical tire baler is concise and efficient,with the main steps as follows:Preparation and inspection:First,ensure that the machine is filled with sufficient No.46 anti-wear hydraulic oil and check if the oil level is appropriate.Next,clean the dirt and debris on the machine,disinfect all parts,check for any loose screws during transportation,and manually turn the belt to see if there are any obstructions.Ensure the power cord is intact.Startup trial run:Momentarily start the machine for an idle trial run,observe whether the machine operates normally,and immediately stop and inspect if any abnormalities are found.After ensuring no issues,correctly thread the packaging material into the forming machine.Material addition and compression:Open the door of the machine,evenly and flatly place the tires or materials to be packaged inside,ensuring no material leakage.After closing the door,operate the pressure handle to compress,wait until the upper pressing row drops to the designated position,then perform the rising operation to complete the compression cycle.Packaging and unloading:Once the material is compressed,secure it with wire or strapping,then open the machine door and push out the packaged material.Adjust the tightness of the packaging as needed.Shutdown and cleaning:After completing the packaging task,press the stop button,disconnect the power,and clean the machine to maintain a tidy surrounding environment.The entire operation process emphasizes safety,efficiency,and standardization,ensuring the normal operation and service life of the baler.
Nick Machinery's waste tire processing equipment requires a small investment,yields quick profits,and is very simple to operate in practice,making it an excellent choice for your equipment projects.
Your message must be between 20-3,000 characters!