Phone Number : 86-2986031588
WhatsApp : +8615021631102
November 23, 2021
The user needs to check the machine when using the automatic waste paper baler, so that the problem may be found and solved in time, but if the user is not very familiar with the maintenance of the equipment, he always looks left and right, I don’t know where to go. To get started, the following NICKBALER will introduce the inspection process of the automatic waste paper baler.
1. First power on the automatic waste paper baler to see if the indicator lights, motors, etc. work.
2. Check the lines to see if there is any disconnection or drop of the connected lines.
3. Check the insurance to see if there is any damage to the insurance everywhere in the automatic waste paper baler.
4. Check the transformer, although the transformer is not easy to break, but in order to eliminate the fault, do not miss it in the process of checking the automatic waste paper baler, and be careful and careful from beginning to end.
5. Check the circuit board. This is the central part of the automatic waste paper baler, so check carefully.
NICKBALER insists on vigorously promoting new product research and development and technological improvement, and carries out continuous independent innovation and research and development in accordance with customer needs and industry development trends. https://www.nickbaler.com
