Phone Number : 86-2986031588
WhatsApp : +8615021631102
October 14, 2021
The pressure of the metal shearing machine does not work, and the scrap can not be cut. What is the cause, and how to deal with it?
1. Whether the operating pressure of the hydraulic system is normal, if it is low, adjust the pressure to the rated operating pressure;
2. Determine whether the oil pump is leaking, and if it leaks, replace it;
3. Whether the oil cylinder is leaking, if leaks, replace the sealing ring. Using the hydraulic oil circuit working principle of the shearing machine, the hydraulic oil is delivered to the integrated cartridge valve block, and the hydraulic oil is distributed to the upper cavity or the lower cavity of the cylinder through various one-way valves and overflow valves, under the effect of high-pressure oil , Make the oil cylinder carry out shearing movement! Check the integrated block under the electromagnetic, if possible, it can be cleaned with diesel.
Nick mechanical shears are suitable for metal recycling companies, scrap steel mills, smelting and foundry companies to perform cold shearing on various shapes of steel and various metal structures. Contact consultation telephone 86-29-86031588