Phone Number : 86-2986031588
WhatsApp : +8615021631102
August 31, 2021
With the promotion and popularization of waste paper balers, more and more paper mills and waste paper recycling stations have begun to use waste paper balers to recycle compressed waste products.
However, in the process of using the waste paper baler, abnormal pressure will inevitably occur. Today, let’s take a look at the countermeasures to solve the abnormal pressure of the waste paper baler:
1. When installing and debugging the hydraulic pump of the waste paper baler, carefully read the instruction manual and strictly implement the requirements of the installation and debugging process regulations.
2. Before starting the hydraulic pump, fill the pump with hydraulic oil. The inlet and outlet ports of the hydraulic pump must be well sealed, and no leakage or air may enter. If it is confirmed whether there is air entering, grease the sealing part and watch the noise of the pump. Whether to reduce, to determine whether air enters during pump operation.
3. When the waste paper baler is assembled with the hydraulic pump, the cleaning and assembly process rules must be implemented. For example, the blades in the vane pump must not be reversed, the movement must be vigorous, and the processing, storage and transportation must strictly follow the drawings and various process requirements, before assembly Strict inspection system is required, and unqualified parts cannot be installed on the pump.