Danish iron powder cake press

Cake Press Price
Strapping Machine, Cake Press, Compactor
When we use any machine, we should strictly follow the operating procedures to avoid unnecessary trouble. The specific precautions are as follows:
1. Check whether the oil level of the fuel tank level gauge is in the normal position. If there is no display, you can see the oil level when you add oil to the level gauge, and ensure that the oil tank is filled with 60% to 80% of the oil before starting the motor;
2. Press the start button, the running indicator light is on, and listen to whether the sound of the oil pump is abnormal. If there is any abnormality, immediately stop the inspection;
3. Adjust the manual transfer switch to the manual position, and operate the machine without feeding material, so that the main cylinder, the plate-drawing cylinder and the feeding cylinder can all work normally. Observe whether the pressure gauge is normal, and whether there is oil leakage in each part of the pipeline and joint;
4. After confirming that each part is normal, switch to automatic operation, and continuously observe the running status of each program during the operation. If there is stagnation, oil leakage, etc., it should be shut down immediately. Please have experienced maintenance personnel to check the maintenance;
5. The operators of each shift should do a good job of cleaning the machine before leaving work, clean up oil and dust, and keep the inside and outside of the electrical control cabinet clean and tidy;
All of NICKBALER can do the job you need and are very easy to operate. Welcome to consult https://www.nickbaler.net