google-site-verification=VorvS210A0qn8r0i8uUmYn4MreEamumQ0C84D-yvCd0
Contact Us
NIck

Phone Number : 86-2986031588

WhatsApp : +8615021631102

Correct operating procedures of horizontal waste paper baler

July 13, 2021

With the increasing awareness of environmental protection, the horizontal waste paper baler has played a great role in reusing some waste paper, and it is becoming more and more popular.
Our company's horizontal balers have been constantly developing and innovating, following the development of some foreign advanced technologies, keeping pace with the times, and creating the most practical, most assured, and most advanced hydraulic packaging machinery for domestic environmental protection.
Let's understand the operating procedures of the horizontal waste paper baler:
1. The hydraulic oil must be added to the specified oil level line before use (46# hydraulic oil).
2. Before starting the hydraulic pump, check the circuit for wrong connection or leakage.
3. When Baling Press, the operator must pay attention to safety, spread the paper evenly, and place the paper in place, and the upper box cover door should be closed before Baling Press can begin.
4. After Baling Press, all hydraulic rods must be retracted into the hydraulic cylinder to prevent dust from damaging the sealing ring and oil leakage.
5. Do regular maintenance work, and immediately find a mechanic to deal with oil leakage in the tubing.
6. If an abnormality is found, the operation should be stopped immediately, and the operation can only be carried out after removing the cause.
7. After the box cover door is opened, pressing the door is strictly prohibited to prevent accidents.
8. Oil pressure: It is strictly forbidden to adjust the pressure without authorization. The operator must work under the adjusted oil pressure, and the maximum pressure limit is 30MPa.
9. The oil in the oil tank must be strictly filtered and always maintain sufficient oil. The oil tank should be cleaned and replaced every six months.
10. When adjusting the pump, valve, and pressure gauge, it must be carried out by experienced technicians. If the pressure gauge is found to be faulty, it should be repaired or replaced immediately.
11. This machine uses 46# anti-wear oil, always pay attention to the oil temperature, and stop it immediately when it exceeds 75°C.

latest company news about Correct operating procedures of horizontal waste paper baler  0
The button centralized control of NICKBALER waste paper baler can realize a variety of working methods, simple and convenient operation, safe and reliable machine operation, and can be customized according to the actual needs of customers. www.nickbaler.com

google-site-verification=VorvS210A0qn8r0i8uUmYn4MreEamumQ0C84D-yvCd0