Shaanxi Nick Machinery
Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:RongHao Industry Garden,Xi'an,Shaanxi,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Company News Your current location:Home >> Company News
  • The waste paper baler has the advantages of good rigidity and stability, beautiful appearance, easy operation and maintenance, and low investment cost of equipment foundation engineering. It is widely used for bundling of loose materials such as waste paper, hemp, grass, plastic film, etc., which greatly saves storage and transportation costs.
    The outstanding advantages of waste paper baler machines are as follows:

    The machine adopts hydraulic transmission, compact structure, convenient transfer, simple operation, easy maintenance, reliable sealing, and no foot screws for installation. Users can customize the packaging specifications and sizes according to their needs to match the transportation or storage to a greater extent. It is a good device to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs.

    1. Product features: economical and practical, easy installation, simple maintenance, low investment cost, and can be used by ordinary personnel
    2. Hydraulic configuration: low-noise hydraulic circuit system, which uses a combination of imported and domestic, not only guarantees quality but also reduces costs, the performance of the whole machine is very stable
    3. Electrical configuration: low failure rate, easy to check and eliminate
    4. Shearing knife: The internationally-used scissors design is selected, which improves the efficiency of paper cutting and has a long service life.
    5. Conveyor: It adopts new PVC materials, which has the advantages of anti-skid, large conveying capacity and strong load capacity.

    6. Length design: can be adjusted according to your own requirements. Simple installation and simple foundation construction

    The above is the outstanding advantage of the waste paper baler. The waste paper baler produced by our company has good product quality and long service life. Our company can provide installation and commissioning for free, and can provide door-to-door maintenance. You can contact us for a visit and give you a reasonable quotation.
  • The horizontal waste paper baler is a hydraulic compression baler that is better for fluffy materials such as waste paper shells, cardboard, paper scraps, etc., which can ensure that the finished paper bales of the baler are neat, which is conducive to storage, transportation and handling , How much do you know about installing and debugging the baler? Here is a brief introduction for everyone:

    1. Installation of horizontal waste paper baler machine: When installing the baler, choose the horizontal position, and the baler should not be installed in a place where direct sunlight. Install the baler in a well-ventilated environment, which is conducive to the heat dissipation of the baler during work.
    2. Test of the power supply of the horizontal baler: Install the power of the baler according to the instruction manual of the baler, and then turn on the power switch of the baler to check whether the baler can start normally.

    3. Commissioning of the horizontal baler machine: After the power supply receives the notification, the machine will be inspected. First, adjust the speed of the baler to the bottom position, start the switch, and test to see if the baler can work normally. After the baler is running, test whether the performance of each switch of the baler can run normally and whether any equipment is abnormal during work. The packing machine is to place the packing materials in the packing box of the packing machine, and the hydraulic oil cylinder works to press it to compress and form the packing materials into high-density packing blocks. Its advantages are that the machine adopts hydraulic transmission, compact structure, simple operation, easy maintenance, reliable sealing, and no foot screws for installation. Users can customize packaging specifications and sizes according to their needs.

    Installation instructions of horizontal waste paper packing machine:
    1. The fasteners at the connection of the oil pipe should be tightened, otherwise the air leakage will cause no pressure on the oil cylinder.
    2. The oil inlet pipe and the oil return pipe are connected according to the thickness of the caliber, and the oil return pipe is returned to the oil tank.
    3. The hydraulic oil (46#) in the oil tank should not be lower than 2/3 of the oil tank during the initial installation.
    4. The power supply voltage is 380V. After the power supply is connected, test the rotation direction of the oil pump and the motor after the power is supplied. There is a mark on the oil pump. Turn in the marked direction. If the direction of rotation is opposite, the power supply is reversed.

    5. After the oil pipe and power supply are connected, the power transmission empty machine (without filler) will be tested according to the operation process to see if there are any problems. If the operation is normal, the packing can be pressed.

    Nick Baler can supply many kinds of baler machine,Waste paper baler machine,Cardboard Paper Baling Machine,For more information ,please visit : www.nickbaler.net or www.nkbaler.com .even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any time

  • What method can the waste paper baler machine use to detect whether the equipment is normal before production, how to operate it? Now to explain to you in detail:

     1, no-load test machine

    Turn on the power of the waste paper hydraulic baler, loosen the overflow valve of the system to make the system overflow smoothly, start the motor (using the method of stopping immediately after starting), and observe whether the direction of the motor is consistent with the direction of the oil pump sign. Start the motor and observe whether the oil pump is stable and reliable during operation. Whether there is significant noise in the pump, if not, you can start the test work. Gradually adjust the relief valve handle of the waste paper hydraulic baler, so that the pressure value is about 8Mpa. Operate in accordance with the operation sequence, perform a single action on each oil cylinder, observe whether it is running smoothly and without vibration, and gradually adjust the main pressure cylinder and side pressure The parallelism of the cylinder and the bottom plate and the side frame fixes the main pressure cylinder and the side pressure cylinder, and supports the rear of the cylinder with an adjustment support.

    2. Load test machine
    (1) The load test can be carried out after the operation of the single cylinder is familiar.
    (2) Adjust the pressure of the waste paper hydraulic baler system so that the pressure value is about 20~26.5Mpa, tighten and tighten the nut. Do several packaging sequences in order of operation. Add material to the compression chamber. The load test is in the form of physical packaging. Suppress 1 or 2 bags and hold the pressure for 3 to 5 seconds after the stroke of each waste paper hydraulic baler cylinder is in place. Perform a pressure test on the system and observe whether there is any Leakage of oil, if any, should be eliminated after the system is relieved of pressure.
  • The straw baler is widely used in various types of straw baler waste paper mills, old recycling companies and other unit enterprises. It is also suitable for the packaging and recycling of used waste paper and plastic straws. It is to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation. Good equipment for cost.
    However, due to the wear of parts and poor lubrication, the straw baler will cause damage to the parts, which may expand the occurrence of faults and accidents. Therefore, it is very important to quickly find faults and eliminate them. Don't ask the manufacturer for help because of a little glitch, and win precious time.
    The straw baler is used to squeeze the waste paper and similar products under normal conditions, and package it with special packaging tape, which greatly reduces its volume, thereby achieving the purpose of reducing transportation volume, saving freight, and increasing benefits for enterprises.
    Straw baler has the following characteristics:
    1. The packing speed is fast, and it takes only 1 minute to complete each strapping.
    2. The use of imported relays for circuit control effectively prolongs the service life of the equipment;
    3. A 2 mm thick rigid plate is used, and the latitude and longitude wires are added to fix the box without welding.

    4. The hydraulic baler is of moderate height, simple and convenient operation, more convenient, and is suitable for packing lighter items.

    5. With improved design and careful manufacturing by professional R&D center, the use of hydraulic baler is continuously expanding, and straw, plastic, pulp, powder and paper scraps can be packed.
    7. The hydraulic baler is a mechanical structure, and some key components use well-known domestic parts

  • The simple use of recycling and non-processing methods to deal with these waste products, horizontal carton waste paper packaging time occupies too much accumulation place, waste paper packaging machine has now become a sophisticated packaging equipment, waste paper packaging machine equipment has become large-scale packaging Important equipment. Although the hydraulic baler has unique advantages in many packaging equipment and has a broad application space in the market, these do not mean that it is indispensable. In a changing market, users will also need hydraulic baler Changes continue to occur, so in order to stabilize its market position and maintain a good development status for a long time, the hydraulic packaging opportunities continue to maintain the development attitude of scientific and technological innovation, using the power of high technology to improve and improve, so as to better meet the market development trend and become more popular welcome.

    Everyone knows about the waste paper baler. With the creation and development of the baler in China, the waste paper baler and its effect are still very complete. The scale of sharing is also very wide. It is lax about waste paper, straw, straw, plastic and other The packing and packing of the items has the characteristics of quick timeliness, and it is a device that increases production capacity and reduces human resources and space compared with the previous month.
  • The waste paper baler machine is an electromechanical integration product. Under the condition of ensuring the same packaging pressure and packing quality, the plastic bottle waste paper baler machine can save 50% of the electricity. The price of the waste paper baler machine greatly saves the electricity consumption of the packing station customers. The cost and effectiveness have been verified. It is their daily work to calculate the waste classification status of each household every week. Driven by them, the residents' awareness of the classification of waste has increased year by year. The pump station is equipped with a pressure gauge to display the pressure during work more intuitively; the oil tank is provided with an oil level display gauge, which can visually display the change of the oil amount, and an electric heater function (optional) is provided to prevent the hydraulic oil from passing during winter start-up Heavy damage to the pump; the oil tank is large enough to dissipate heat during work to prevent the oil temperature from being too high in summer and the oil dilute pressure to reduce or damage the seal.


    Hydraulic waste paper baler is an automatic waste paper baler equipment used to squeeze waste paper and similar products under normal conditions and package it with special packaging tape, which greatly reduces the volume of waste paper, paper skin, garbage and other materials. , So as to achieve the purpose of reducing transportation volume, saving freight, and increasing benefits for enterprises. Interchangeable. Feeding line sleeve, straw bale packing machine manufacturer of waste paper packing machine Purpose: each set corresponds to the same beat, each set contains a packing line conveying device and a packing line anti-tensioning device.
Shaanxi Nick Machinery Equipment Co. LTD
TEL:86-29-86031588
Fax:86-29-86031588 Sitemap
Add:RongHao Industry Garden,Xi'an,Shaanxi,China
Email:sales@nkbaler.com
WhatsApp:008615021631102
Copyright © 2018 NKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD