New Zealand wheat straw baler hydraulic valve block

In the process of constructing the wheat straw baler, there is a very delicate component called the hydraulic valve block. The valve block is a small circuit that combines various valves that are used through the oil holes on the valve block. For example, we use today. An equalizing valve block, which combines equalizing valves, pressure reducing valves, one-way valves, reversing valves, and so on.
When we use the wheat straw baler, the hydraulic valve block is indispensable. There are many precautions during the installation process. Let's take a look.
1. When installing the hydraulic valve block of the wheat straw baler, pickling the oil hole to ensure that the residue in the oil hole is cleaned and fastened to the foundation with bolts evenly. The installation direction and position must not be wrong.
2. Before installation, all types of valves should be checked with the design drawings for the model and whether the specifications are consistent. There are often multiple types of valves on a valve block combined into one. The installation should be distinguished whether the direction, position, stacking level, etc. can fit the drawing. Claim.
3. The device and sealing surface of the valve and valve block of the wheat straw baler should be intact, the seals should be intact, and the bolts should be fastened evenly, firmly and without leakage.
4. Before assembling each valve and valve block, each oil port should be sealed to prevent dust from entering.

The installation in the above way can ensure the perfect installation of the hydraulic valve block of the wheat straw baler, and there will be no problems in the work.
The design of the NICKBALER wheat straw baler is practical and beautiful, and the key components are well-known products at home and abroad. It has the characteristics of fast speed and high precision. www.nickbaler.com